BS EN ISO 868 塑料和硬質橡膠.用硬度計測定壓痕硬度(肖氏硬度)-標準名稱

BS EN ISO 868 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)

BS EN ISO 868 塑料和硬質橡膠.用硬度計測定壓痕硬度(肖氏硬度)

?

BS EN ISO 868 塑料和硬質橡膠.用硬度計測定壓痕硬度(肖氏硬度)—適用范圍

This International Standard specifies a method for the determination of the indentation hardness of plastics and ebonite by means of durometers of two types: type A is used for softer materials and type D for harder materials (see the Note to 8.2). The method permits measurement either of the initial indentation or of the indentation after a specified period of time, or both. NOTE The durometers and the methods specified in this International Standard are referred to as type A Shore and type D Shore durometers and durometer methods, respectively. 1.2 This method is an empirical method intended primarily for control purposes. No simple relationship exists between indentation hardness determined by this method and any fundamental property of the material tested. For specification purposes, it is recommended that ISO 48, Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD), be used for the softer materials.

?

BS EN ISO 868 塑料和硬質橡膠.用硬度計測定壓痕硬度(肖氏硬度)—相關標準

KS M ISO 868 塑料和硬質膠.用硬度計測定針入硬度[肖氏(SHORE)硬度]

JUS G.S2.525 塑料．壓痕硬度的硬度計法測定（肖氏硬度）

DIN EN ISO 868 塑料和硬質膠.用硬度計測定針入硬度[肖氏(SHORE)硬度]

DIN 53505? 生橡膠.彈性體和塑料的檢驗.肖氏(Shore)A和D 硬度試驗

BS EN ISO 868? 塑料和硬質橡膠.用硬度計測定壓痕硬度(肖氏硬度)

BS 7442 Sec.3.2 橡膠或塑料被覆輥?zhàn)?肖氏硬度的試驗測定方法

EN ISO 868? 塑料和硬質橡膠.用硬度計測定壓痕硬度［肖氏(SHORE)硬度］ ISO 868-2003

ISO 868 塑料和硬質膠.用硬度計測定針入硬度[肖氏(SHORE)硬度]

ISO 868 塑料和硬質橡膠 用硬度計測定壓痕硬度[肖氏(SHORE)硬度]

NF T51-174 塑料和硬質橡膠.用硬度計測定壓痕硬度[肖氏(SHORE)硬度]

詳情請咨詢：中科易朔防火技術服務有限公司

出自GF2021