C64728 NKC286S銅合金耐化學腐蝕性好

Cu Pb20 Sn 5 ,? (Cu Sn5 Pb20-V), CC497K

Cu Zn15? German standard / DIN 17660, Kupfer-Zinn (Messinge)? SS 5112, ingen tillg nglighet

Cu Zn20? German standard / DIN 17660, Kupfer-Zinn (Messinge)? SS 5114, ingen tillg nglighet

Cu Zn20 Al2? German standard / DIN 17660, SonderMessinge? SS 5217, CW702R, ingen tillg nglighet

Cu Zn23 Al6 Mn4 Fe3? German standard / DIN 17660, SonderMessinge? ~extruderad SS 5234, CC704R, viss tillg ngligh.

Cu Zn25 Al5? German standard / DIN 17660, SonderMessinge? SS 5234 (SoMsF75), CC762S, viss tillg nglighet

Cu Zn28 Sn1? German standard / DIN 17660, SonderMessinge? ”Naval Brass”, ingen tillg nglighet

Cu Zn30? German standard / DIN 17660, Kupfer-Zinn (Messinge)? SS 5122, ingen tillg nglighet

Cu Zn33 Pb2? German standard / DIN 17660, Kupfer-Zinn (Messinge)? SS 5144, ingen tillg nglighet

Cu Zn35 Al1? German standard / DIN 17660, SonderMessinge? SS 5256, ~CW710R? (Cu Zn35 Ni3 Mn2 Al Pb, SoMs)?

Cu Zn35 Ni 2? German standard / DIN 17660, SonderMessinge? ~SS 5256, CW710R,? viss tillg nglighet?

Cu Zn36 Pb1.5? German standard / DIN 17660, Kupfer-Zinn (Messinge)? ~ SS 5150 (med extra Pb), ingen tillg nglighet

紫銅的用途比純鐵廣泛得多，每年有50%的銅被電解提純?yōu)榧冦~，用于電氣工業。這里所說的紫銅，確實要非常純，含銅達99.95%以上才行，很少量的雜質，特別是磷、砷、鋁等，會大大降低銅的導電率。主要用于制作發電機﹑母線﹑電纜﹑開關裝置﹑變壓器等電工器材和熱交換器﹑管道﹑太陽能加熱裝置的平板集熱器等導熱器材。銅中含氧(煉銅時容易混入少量氧)對導電率影響很大，用于電氣工業的銅一般都必須是無氧銅。另外，鉛、銻、鉍等雜質會使銅的結晶不能結合在一起，造成熱脆，也會影響純銅的加工。這種純度很高的純銅，一般用電解法精制：把不純銅(即粗銅)作陽很，純銅作陰很，以硫酸銅溶液為電解液。當電流通過后，陽很上不純的銅逐漸熔解，純銅便逐漸沉淀在陰很上。這樣精制而得的銅;純度可達99.99%。

紫銅還用于電機短路環，電磁加熱感應器的制作，和大功率電子元件上面，接線排接線端子之類的。

紫銅也運用到了門、窗、扶手等家具及裝飾上。