一、Isilon 存儲硬件說明

內部交換機：Isilon使用25GB IP交換機做集群節點間的文件數據同步、數據拆分組合等。此次配置DellEMC S4112F-ON交換機兩臺。

外部網絡交換機：提供前端服務器訪問，要求為1Gige或10Gige網絡。

Isilon存儲節點：Isilon最新的產品線分為S系列、X系列、NL系列、EX系列和Accelerate備份加速器及Gen 6 A系列和H系列，本次實施為4節點A200。

二、實施準備

1.內部網絡

每節點必須配置至少一個IP地址和子網掩碼（內部/私有網絡對外部網是不可見的）；如果希望配置內部冗余網絡，則每節點需要兩個或者更多IP地址用于冗余（不能與非冗余地址在一個子網內）；如果配置故障切換，則還需要一個Failover IP子網。分別為int-a、int-b、failover。

2.外部網絡

1.? 每節點必須配置至少一個IP地址和子網掩碼(除非使用NANON—NANON即Not All Nodes On Network，非所有節點入網)；

2.? 如果配置NFS Failover，則需要配置第二個外部網口IP地址（不能與第一個網口在同一個子網）和一個NFS Failover IP地址；

3.? 配置SmartConnect 則需要的額外Service IP地址統一對外訪問（與第一個網卡在同一子網）；

4.? 另外根據客戶需要配置DNS服務器、DNS域、默認網關

3.配置規劃

三、實施步驟

1.連接拓?fù)浜烷_(kāi)機加電

Isilon 內部網絡冗余拓?fù)?/p>

Isilon 加電需要雙路電源和兩塊電池，如果任意節點上的電池出現故障，該節點將進入只讀模式；Isilon加電后，按前面板的電源按鈕方可啟動Isilon節點。

2.連接串口

使用串口線連接Isilon，通過SecureCRT以如下配置訪問Isilon：

*其中Port：選項根據管理機的實際情況選擇

?

3.創建第一個節點

選擇[1]創建一個新集群：

Please select an option.

??????? Node build: Isilon OneFS v8.2.2.0 B_8_2_2_016(RELEASE)

??????? Node serial number: SJWXNT183800289

?????? ?[ 1] Create a new cluster

??????? [ 2] Join an existing cluster

??????? [ 3] Exit wizard and configure manually

??????? [ 4] Reboot into SmartLock Compliance mode

?Wizard >>> ???1??

閱讀軟件許可和維護協議，并接受

SOFTWARE LICENSE AND MAINTENANCE AGREEMENT

?

*** IMPORTANT INFORMATION - PLEASE READ CAREFULLY ***

?

This Software contains computer programs and other proprietary material and

information, the use of which is subject to and expressly conditioned upon

acceptance of this Software License and Maintenance Agreement (the

"Agreement").

…………

…………

Do you accept the EULA? [no] yes

?

輸入root密碼和admin密碼：

Please change the root password from the default.

Please enter new password for root:

Please re-enter password for root:

Password changed.

Please change the admin password from the default.

Please enter new password for admin:

Please re-enter password for admin:

Password changed.

輸入集群名：

Enter a new name for the cluster:

Configure name >>> Lxyy-isilon

?

Cluster name set to isilon

輸入字符集：

Cluster encoding:

??????? [ 1] Windows-SJIS

??????? [ 2] Windows-949

??????? [ 3] Windows-1252

??????? [ 4] EUC-KR

??????? [ 5] EUC-JP

??????? [ 6] EUC-JP-MS

??????? [ 7] UTF-8-MAC

??????? [ 8] UTF-8

??????? [ 9] ISO-8859-1 (Latin-1)

??????? [10] ISO-8859-2 (Latin-2)

??????? [11] ISO-8859-3 (Latin-3)

??????? [12] ISO-8859-4 (Latin-4)

??????? [13] ISO-8859-5 (Cyrillic)

??????? [14] ISO-8859-6 (Arabic)

??????? [15] ISO-8859-7 (Greek)

??????? [16] ISO-8859-8 (Hebrew)

??????? [17] ISO-8859-9 (Latin-5)

??????? [18] ISO-8859-10 (Latin-6)

??????? [19] ISO-8859-13 (Latin-7)

??????? [20] ISO-8859-14 (Latin-8)

??????? [21] ISO-8859-15 (Latin-9)

??????? [22] ISO-8859-16 (Latin-10)

??????? [Enter] Use current encoding: utf-8

Configure encoding >>> 8

Encoding set to utf-8

?

配置int-a

Configure interface int-a:

??????? [ 1] Configure netmask

??????? [ 2] Configure int-a IP ranges

??????? [Enter] Keep the current configuration:

?????????????????? Netmask: (not set)

???????????????? IP ranges: (not set)

Configure interface int-a >>> 1

?

Enter a new netmask

Configure int-a netmask >>> 255.255.255.0

?

Configure interface int-a:

??????? [ 1] Configure netmask

??????? [ 2] Configure int-a IP ranges

??????? [Enter] Keep the current configuration:

?????????????????? Netmask: 255.255.255.0

???????????????? IP ranges: (not set)

Configure interface int-a >>> 2

?

Configure int-a IP ranges

??????? [ 1] Add an IP range

??????? [ 2] Delete an IP range

??????? [Enter] Keep the current IP ranges:

???????????????? IP ranges: (not set)

Configure int-a IP ranges >>> 1????? ?

?

Enter the low IP address of the range to add:

Low IP address (add) >>> 10.0.0.1

?

Enter the high IP address of the range:

High IP address (add) >>> 10.0.0.254

?

Configure int-a IP ranges

??????? [ 1] Add an IP range

??????? [ 2] Delete an IP range

??????? [Enter] Keep the current IP ranges:

???????????????? IP ranges: 10.0.0.1-10.0.0.254

Configure int-a IP ranges >>> [Enter]

?

Configure interface int-a:

??????? [ 1] Configure netmask

??????? [ 2] Configure int-a IP ranges

??????? [Enter] Keep the current configuration:

?????????????????? Netmask: 255.255.255.0

???????????????? IP ranges: 10.0.0.1-10.0.0.254

Configure interface int-a >>> [Enter]

配置int-b

Select the internal interfaces to configure

??????? [ 1] int-a - primary internal interface

??????? [ 2] int-b - secondary internal interface (failover)

??????? [Enter] Exit configuring internal interfaces

Configure internal interfaces >>> 2

?

Configure interface int-b (failover):

??????? [ 1] Configure netmask

??????? [ 2] Configure int-b IP ranges

??????? [ 3] Configure failover IP ranges

??????? [Enter] Keep the current configuration:

?????????????????? Netmask: (not set)

???????????????? IP ranges: (not set)

????? ??Failover IP ranges: (not set)

????????????????? Failover: disabled

Configure interface int-b (failover) >>> 1

?

Type a new netmask

Configure int-b netmask >>> 255.255.255.0

?

Configure interface int-b (failover):

??????? [ 1] Configure netmask

??????? [ 2] Configure int-b IP ranges

??????? [ 3] Configure failover IP ranges

??????? [Enter] Keep the current configuration:

?????????????????? Netmask: 255.255.255.0

???????????????? IP ranges: (not set)

??????? Failover IP ranges: (not set)

???????? ?????????Failover: disabled

Configure interface int-b (failover) >>> 2

?

Configure int-b IP ranges

??????? [ 1] Add an IP range

??????? [ 2] Delete an IP range

??????? [Enter] Keep the current IP ranges:

???????????????? IP ranges: (not set)

Configure int-b IP ranges >>> 1

?

Enter the low IP address of the range to add:

Low IP address (add) >>> 10.0.1.1

?

Enter the high IP address of the range:

High IP address (add) >>> 10.0.1.254

?

Configure int-b IP ranges

??????? [ 1] Add an IP range

??????? [ 2] Delete an IP range

??????? [Enter] Keep the current IP ranges:

? ???????????????IP ranges: 10.0.1.1-10.0.1.254

Configure int-b IP ranges >>> [Enter]

配置failover

Configure interface int-b (failover):

??????? [ 1] Configure netmask

??????? [ 2] Configure int-b IP ranges

??????? [ 3] Configure failover IP ranges

??????? [Enter] Keep the current configuration:

?????????????????? Netmask: 255.255.255.0

???????????????? IP ranges: 10.0.1.1-10.0.1.254

??????? Failover IP ranges: (not set)

???????????? ?????Failover: disabled

Configure interface int-b (failover) >>> 3

?

Configure failover IP ranges

??????? [ 1] Add an IP range

??????? [ 2] Delete an IP range

??????? [Enter] Keep the current IP ranges:

??????? Failover IP ranges: (not set)

Configure failover IP ranges >>> 1

?

Enter the low IP address of the range to add:

Low IP address (add) >>> 10.0.2.1

?

Enter the high IP address of the range:

High IP address (add) >>> 10.0.2.254

Configure failover IP ranges

??????? [ 1] Add an IP range

??????? [ 2] Delete an IP range

??????? [Enter] Keep the current IP ranges:

? ??????Failover IP ranges: 10.0.2.1-10.0.2.254

Configure failover IP ranges >>> [Enter]

?

Configure interface int-b (failover):

??????? [ 1] Configure netmask

??????? [ 2] Configure int-b IP ranges

??????? [ 3] Configure failover IP ranges

??????? [ 4] Disable failover

??????? [Enter] Keep the current configuration:

?????????????????? Netmask: 255.255.255.0

???????????????? IP ranges: 10.0.1.1-10.0.1.254

?????? ?Failover IP ranges: 10.0.2.1-10.0.2.254

????????????????? Failover: enabled

Configure interface int-b (failover) >>> [Enter]

?

Select the internal interfaces to configure

??????? [ 1] int-a - primary internal interface

??????? [ 2] int-b - secondary internal interface (failover)

??????? [Enter] Exit configuring internal interfaces

Configure internal interfaces >>>[Enter]

配置外部地址

?

Configure external subnet

??????? [ 1] mgmt-1 - External interface

??????? [ 2] 10gige-1 - External interface

??????? [Enter] Exit configuring external network.

Configure external subnet >>> 2

?

Configure interface 10gige-1:

??????? [ 1] Configure netmask

??????? [ 2] Configure MTU

??????? [ 3] Configure 10gige-1 IP ranges

??????? [Enter] Keep the current configuration:

?????????????????? Netmask: (not set)

?????????????????????? MTU: 1500

???????????????? IP ranges: (not set)

Configure interface 10gige-1 >>> 1

?

Enter a new netmask

Configure 10gige-1 netmask >>> 255.255.255.0

?

Configure interface 10gige-1:

??????? [ 1] Configure netmask

??????? [ 2] Configure MTU

??????? [ 3] Configure 10gige-1 IP ranges

??????? [Enter] Keep the current configuration:

?????????????????? Netmask: 255.255.255.0

?????????????????????? MTU: 1500

???????????????? IP ranges: (not set)

Configure interface 10gige-1 >>> 3

?

Configure external IP ranges

??????? [ 1] Add an IP range

??????? [ 2] Delete an IP range

??????? [Enter] Keep the current IP ranges:

???????????????? IP ranges: (not set)

Configure 10gige-1 IP ranges >>> 1

?

Enter the low IP address of the range to add:

Low IP address (add) >>> 192.168.12.60

?

Enter the high IP address of the range:

High IP address (add) >>> 192.168.12.71

?

Configure external IP ranges

??????? [ 1] Add an IP range

??????? [ 2] Delete an IP range

??????? [Enter] Keep the current IP ranges:

???????????????? IP ranges: 192.168.12.60-192.168.12.71

Configure 10gige-1 IP ranges >>> [Enter]

?

Configure interface 10gige-1:

??????? [ 1] Configure netmask

??????? [ 2] Configure MTU

??????? [ 3] Configure 10gige-1 IP ranges

??????? [Enter] Keep the current configuration:

?????????????????? Netmask: 255.255.255.0

?????????????????????? MTU: 1500

???????????????? IP ranges: 192.168.12.60-192.168.12.71

?Configure interface 10gige-1 >>>[Enter]??

配置網關地址

Enter default gateway:

Configure default gateway >>> 192.168.12.1

配置SmartConnect

Configure SmartConnect settings

??????? [ 1] SmartConnect zone name

??????? [ 2] SmartConnect service IP

??????? [Enter] Keep the current SmartConnect settings:

??????? SmartConnect zone name: (not set)

???????? SmartConnect service IP: (not set)

Configure SmartConnect settings >>> 1

?

Enter SmartConnect zone name

SmartConnect zone name >>> isilon.lxyy.com

?

Configure SmartConnect settings

??????? [ 1] SmartConnect zone name

??????? [ 2] SmartConnect service IP

??????? [Enter] Keep the current SmartConnect settings:

??????? SmartConnect zone name: service.isilon.com

???????? SmartConnect service IP: (not set)

Configure SmartConnect settings >>> 2

?

Enter SmartConnect service IP

SmartConnect service IP >>> 192.168.12.88

?

Configure SmartConnect settings

??????? [ 1] SmartConnect zone name

??????? [ 2] SmartConnect service IP

??????? [Enter] Keep the current SmartConnect settings:

??????? SmartConnect zone name: isilon.lxyy.com

???????? SmartConnect service IP: 192.168.12.88

Configure SmartConnect settings >>> ?[Enter]

跳過DNS配置

Configure DNS settings

[ 1] DNS servers

[ 2] Search domains

[Enter] Keep current DNS settings:

???? DNS servers: (not set)

? Search domains: (not set)

Configure DNS settings >>> 1

?

Enter a comma-separated list of DNS servers:

Configure DNS >>> 192.168.12.1

?

Configure DNS settings

[ 1] DNS servers

[ 2] Search domains

[Enter] Keep current DNS settings:

???? DNS servers: 192.168.12.1

? Search domains: (not set)

Configure DNS settings >>> 2

?

Enter a comma-separated list of search domains:

Search domains >>> lxyy.com

?

Configure DNS settings

[ 1] DNS servers

[ 2] Search domains

[Enter] Keep current DNS settings:

???? DNS servers: 192.168.12.1

? Search domains: lxyy.com

Configure DNS settings >>> [Enter]?

?

Configure external subnet

??????? [ 1] ext-1 - External interface

??????? [ 2] 10gige-1 - External interface

??????? [Enter] Exit configuring external network.

Configure external subnet >>> [Enter]

配置時間

Configure cluster date and time

??????? [ 1] Configure time zone

??????? [ 2] Configure day and time

??????? [Enter] Keep the current date and time: 2021/04/14 07:16:12 UTC.

Configure date >>> 1

?

Configure cluster time zone

??????? [ 1] Greenwich Mean Time

??????? [ 2] Eastern Time Zone

??????? [ 3] Central Time Zone

??????? [ 4] Mountain Time Zone

??????? [ 5] Pacific Time Zone

??????? [ 6] Arizona

??????? [ 7] Alaska

?????? ?[ 8] Hawaii

??????? [ 9] Japan

??????? [10] Advanced

??????? [Enter] Keep current time zone: Greenwich Mean Time

Configure time zone >>> 5

Pacific Time Zone

?

Configure cluster date and time

??????? [ 1] Configure time zone

??????? [ 2] Configure day and time

??????? [Enter] Keep the current date and time: 2021/04/14 00:16:26 PDT.

Configure date >>> 2

?

Type new date and time values

or press [Enter] to keep the current date and time: 2021/04/14 00:16:33 PDT.

Configure time >>> 2021/04/14 15:19:00

?

Configure cluster date and time

??????? [ 1] Configure time zone

??????? [ 2] Configure day and time

??????? [Enter] Keep the current date and time: 2021/04/14 15:19:00 PDT.

Configure date >>> [Enter]

配置集群加入模式，默認手動

Configure cluster join mode

??????? [ 1] Manual

? ??????[ 2] Secure

??????? [Enter] Keep the current join mode: Manual

Configure join mode >>> ?[Enter]

Join mode set to Manual.

確認信息

You have made the following configuration changes:

?

Cluster name?????????? : (not set) -> Lxyy-isilon

Encoding???????????? ??: (not set) -> utf-8

int-a????????????????? : enabled -> enabled

int-a netmask????????? : (not set) -> 255.255.255.0

int-a IP ranges??????? : (not set) -> { 10.0.1.1-10.0.1.254 }

int-b????????????????? : disabled -> enabled

int-b netmask????????? : (not set) -> 255.255.255.0

int-b IP ranges??????? : (not set) -> { 10.0.2.1-10.0.2.254 }

lpbk?????????????????? : disabled -> enabled

lpbk netmask?????????? : (not set) -> 255.255.255.0

lpbk IP ranges???????? : (not set) -> { 10.0.3.1-10.0.3.254 }

10gige-1 netmask?????? : (not set) -> 255.255.255.0

10gige-1 IP range????? : (not set) -> { 192.168.12.60-192.168.12.70 }

10gige-1 gateway?????? : (not set) -> 192.168.12.254

SmartConnect zone name : (not set) -> isilon.lxyy.com

SmartConnect service IP: (not set) -> 192.168.12.88

DNS servers??????????? : (not set) -> { 192.168.18.1 }

Search domains???????? : (not set) -> { lxyy.com }

Do you wish to commit these changes? [yes]

Commit changes? >>> ?yes

?

?

等待完成初始化……

?

4.加入新的 Isilon 節點

通過串口線連接新結點加入現有集群，也可以使用Web administration登錄集群中任何一節點將新結點加入集群，只要節點能夠通過Infiniband與集群通信，集群就可以識別新結點；下面將使用串口擴充集群。

Please select an option.

??????? Node build: Isilon OneFS v8.2.2.0 B_8_2_2_016(RELEASE) ?

??????? Node serial number: JWXNT183800140

Select an option:

??????? [ 1] Create a new cluster

??????? [ 2] Join an existing cluster

??????? [ 3] Exit wizard and configure manually

??????? [ 4] Reboot into SmartLock Compliance mode

Wizard >>> 2

?

等待加入節點，初始化完成。

第三個節點同樣操作。

在瀏覽器輸入SmartConnect IP 或IP pool中的任意IP即可登陸Isilon Administration：