【液相應用】waters ACQUITY 各組件未與 DHCP 通訊 ACQUITY components are not communicating with DHCP

菜鳥博士Caesar

ACQUITY 各組件未與 DHCP 通訊 中文版

故障描述

ACQUITY 各組件無法與 DHCP 建立通訊

Ping IP 地址顯示未接收到信號

從 DHCP 中刪除模塊后，關閉電源再重新打開電源后，名稱和序列號不會填充在 DHCP 中

環境

Empower 3 軟件單機

MassLynx 軟件

原因

一個或多個模塊與主機失去通訊

解決方法

請檢查所有以太網連接

清除 DHCP；重新啟動 PC

重新啟動 ACQUITY 各組件；檢查 DHCP 響應。

如果未與 DHCP 建立通訊，請檢查 NIC 連接和/或設置。

根據用于 MassLynx 和 Empower 控制的以太網儀器的 Windows 7 專業版 64 位安裝和配置設置以太網/防火墻設置

重新啟動 PC 和 ACQUITY 各組件的電源。通訊應恢復

ACQUITY components are not communicating with DHCP - 英文版

SYMPTOMS

ACQUITY components are unable to establish communications with DHCP

Pinging IP addresses indicates no signal received

When a module is deleted from DHCP, powered off and back on, the name and serial number does not populate in DHCP

ENVIRONMENT

Empower 3 Standalone

MassLynx

CAUSE

One or more modules has lost communication with host computer

FIX or WORKAROUND

Check all Ethernet connections

Clear out DHCP; reboot the PC

Reboot ACQUITY components; check DHCP response.

If no communication with DHCP, check the NIC connection and/or settings.

Set Ethernet/firewall settings according to Windows 7 Professional 64 Bit Installation and Configuration for MassLynx and Empower Controlled Ethernet Instruments

Reboot the PC and power-cycle the ACQUITY components. Communications should resume

ADDITIONAL INFORMATION

Refer to How to configure the Waters DHCP Server for additional information.

These directions are applicable to all Waters ethernet controlled instrument